Far HL40R LED Cree XP-L HI V2, 600lm, focalizabil, Li-Pol, reîncărcabil

Lampa frontală reîncărcabilă Fenix HL40Rzoom oferă până la 600 lumeni (ANSI) și o rază de acțiune de până la 147 metri.

Puterea este furnizată de o baterie încorporată de polimeri de litiu de 2000 mAh, care se încarcă prin intermediul unui conector micro-USB direct în far. Sursa de lumină este un LED modern Cree XP-L HI V2, lumina sa este direcționată de optica specială TIR (Total Internal Reflection) cu posibilitatea de a regla lățimea conului de lumină (funcția de zoom).

Un total de 7 moduri de alimentare sunt disponibile, inclusiv un mod SOS flash pentru situații de urgență. În ciuda opticii reglabile, lanterna de cap își păstrează gradul de impermeabilitate IP66, astfel încât poate rezista fără probleme la ploi abundente. Cureaua lanternei frontale este echipată cu elemente reflectorizante care asigură o bună vizibilitate omnidirecțională atunci când vă deplasați pe drum. Datorită greutății de numai 130 de grame, Fenix HL40R este perfect pentru drumeții, căutare și salvare, ca lampă frontală pentru alergare, camping, fotografie, lampă frontală pentru pescari și alte activități.

Toți parametrii lanternei frontale (putere lumen, durata de viață a bateriei, impermeabilitate, autonomie și rezistență la șocuri) sunt măsurați în conformitate cu ANSI/NEMA FL 1-2009.

Parametrii

• LED Cree XP-L HI V2 alb puternic cu o durată de viață de 50.000 de ore.
• 7 moduri de iluminare: BURST 600 lumeni (trece la modul de iluminare anterior după 1 minut) -

The zooming rechargeable Fenix HL40R headlamp delivers a luminous flux of up to 600 lumens (ANSI) and a range up to 147 meters.

Power is provided by a built-in lithium-polymer battery with a capacity of 2000 mAh, which is charged via a micro-USB connector directly in the headlamp. The light source is a modern LED Cree XP-L HI V2, its light is directed by special TIR (Total Internal Reflection) optics with the possibility of adjusting the width of the light cone (zoom function).

A total of 7 lighting modes are available, including an SOS flash mode for emergency situations. Despite the adjustable optics, the headlamp maintains water resistance according to the IP66 standard, so it can easily withstand heavy rain. The headlamp strap is equipped with reflective elements, which ensure good all-round visibility when moving on the road. Thanks to the weight of only 130 grams, the Fenix HL40R is excellent for hiking, search and rescue work, as a headlamp for running, camping, photography, a headlamp for fishing and other activities.

All headlamp parameters (luminous flux, battery life, water resistance, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters

• Powerful white LED Cree XP-L HI V2 with a lifetime of 50000 hours.
• 7 lighting modes: BURST 600 lumens (switches to the previous lighting mode after 1 minute) -> 300 lumens (4.5 hours) -> 130 lumens (11 hours) -> 70 lumens (22 hours) -> 30 lumens (50 hours) -> 4 lumens (200 hours) -> SOS 30 lumens (100 hours).
• TIR optics with a focusing function create a cone with a range of 43 - 147 meters (472 cd - 5426 cd).
• Digitally regulated for constant brightness.
• Uses a built-in lithium-polymer battery with a capacity of 2000 mAh.
• Four-part battery charge status indicator.
• Recharging via micro USB connector.
• Convenient control using two switches.
• The headlamp can be tilted in the holder and thus set the desired lighting direction.
• Made of durable plastic and aircraft aluminum alloy.
• The strap with reflective elements increases passive safety, the double back part increases the comfort of wearing on the head.
• Impact resistant to drops from a height of 1 m.
• Dimensions 6.8 x 5.4 x 4.2 cm.
• Weight 130 g (including battery and straps).
• Waterproof and dustproof according to the IP66 standard (spraying with strong streams of water from all directions).
• The color of the headlamp is gray, the strap is blue
• The package includes a strap and a USB charging cable.

Usage

Holding the right (main) button for 0.5 seconds will always switch the headlamp to 70 lumen mode. With further presses of this button, you can switch between 30 - 70 - 130 - 300 lumen modes at any time during operation. Burst mode (600 lumens) is activated by holding down the right button for 1.2 seconds (even if the headlamp is off). Pressing the right button again will return the headlamp to its original mode.

By holding down the left (smaller) button for 0.5 seconds, the headlamp will always switch to 4 lumen mode (suitable for e.g. reading). With further presses of this button, you can switch between the 4 lumen and SOS modes.

The width of the cone is adjusted by turning the ring around the optic. Turning clockwise narrows the cone, counter-clockwise widens it.

Battery charge status indication - after a short press of the left button (the headlamp must be switched off), the LED indicator of the battery charge status on the top of the headlamp is activated. Four lit LEDs mean the battery is more than 80% charged, three lit 60-80%, two 40-60%, one 20-40% and one flashing means the battery is less than 20% charged.

Protection against overheating - operation in Burst mode is limited to 1 minute at a time, after which the headlamp returns to the previous lighting mode.

The control buttons can be locked to prevent spontaneous activation, e.g. when transported in luggage - hold both buttons pressed for 3 seconds. Then the flashlight will flash. To unlock, hold both buttons again for 3 seconds.

Charging

• Unfold the rubber cover of the micro USB connector on the back of the headlamp and use the included USB cable to connect it to a computer, USB network adapter or USB car adapter. Any mobile phone charger with a micro USB connector can also be used for charging.
• During charging, the four indicator diodes on the top light up gradually, after full charge they all light up permanently.
• The charging time of a fully discharged battery takes approx. 4 hours.
• The battery used does not suffer from a memory effect, so the headlamps can be recharged at any time.
• Thoroughly seal the USB connector cap after each charge.
• During charging, the headlamp can be turned on, but only in 4 lumen mode.

Warning

• Do not disassemble the sealed parts yourself, this will void the warranty.
• If the headlamp flashes, does not switch to higher power modes or does not light up, it may be due to a low battery - charge it.